We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Compression springs
The last type of coil spring is a pressure spring with a variable winding or variable stroke. These compression springs are not constructed with an equal distance between the turns, but the turns are made in sets with some space between the turns.
Compression springs according to ISO 102430 are die springs. These die springs can be found in our webshop.
The catalog of our compression springs can be downloaded here.
Standard compression springs are made of spring steel or stainless steel. They start with a wire thickness of 0.2 to 10 mm.
Compression springs can be easily purchased from Tevema in our webshop. You can also easily order custom compression springs from us.
Coil springs are compression spring versions. The most common type of compression spring is made with an constant pitch (distance between the turns). To obtain a constant pitch, all turns of the compression spring are evenly spaced. The constant pitch coil spring is a known standard compression spring.
An type of compression spring is a conical compression spring. The conical compression springs are pyramidal. The pyramidal shape of the helical coil spring enables the delivery of forces in a limited space (axial space). This is because all the windings are put together in full compression.
A type of helical coil spring is the barrel spring, which gets its name from its barrel-like appearance. A barrel spring is a type of compression spring that produces linear forces where the top and bottom outer diameters are smaller than the median outer diameter. Thanks to this, the spring saves space.
The fourth type of compression spring is built like an hourglass, this helical coil spring has a higher upper and lower outer diameter compared to the middle outer diameter. These coil springs have high stability and, like conical compression springs, are suitable for smaller spaces.
In order to stack compression springs, there are three common ways:
- Parallel stacking
- Series stacking
- Mixed stacking
Read more about stacking compression springs here .
Calculate the dynamic use of compression springs as follows:
* variable load, number of changes> 10 ^ 7; here is the limited service life.
* variable load, number of cycles <10 ^ 7, the service life is theoretically unlimited.
If a standard quasi-static or dynamic spring is used, please contact our engineering department for a service life calculation.
The maximum operating temperatures of the compression springs are:
Music wire: max. +80 degrees celsius
Stainless steel wire: max. +250 degrees celsius
DIN 17224 / X10CrNi 18-8 / AISI 302 / No. 1.4310 / EN 10270-3: 01 is the standard stainless steel wire for compression springs.
Music wire:
DIN 17223 C / No. 1.1200
Wire 2: EN10270-1: 01 DH (duty free)
> Wire 2: EN10270-1: 01 SH
Compression springs are calculated and manufactured according to DIN 2089-1 / DIN 2095-2 (EN13906-1)
Yes, custom compression springs can be ordered from Tevema. Compression springs can be cold produced up to a wire thickness of up to 20 mm. The compression springs may have a maximum outer diameter of 200 mm and a maximum free length of 4,000 mm.
All custom compression springs are manufactured to / from:
- 20 mm cold rolled wire
- CNC machines
- High precision
- 100% control of unloaded spring length and diameter if required.
- In all common work materials
Presets are standard including:
- Wire range: 15 mm
- Free length: 500 mm
- Spring outer diameter: 169 mm
For all available post-treatment treatments see: Post-treatments.
Here you can order a custom compression spring.
Read more? You can do it here.
There are five types of compression springs (coil springs). The difference is explained here. The five-type pressure springs are:
1. Compression springs with constant pitch
2. Springs with variable pitch
3. Barrel Springs
4. Hourglass springs
5. Conical compression springs
in the design or selection of the right compression spring, the following steps apply:
- Compression spring type
- end of the compression spring
- The number of turns
- To properly configure the compression spring
- The permitted spring force
- The spring index
- Pressure spring calculations
Five ways to select one of the standard compression springs:
There are five basic methods in order to arrive at the right compression spring. Here they explained all five, there is only one method required.
- On the basis of physical dimensions
- On the basis of the spring constant
- On the basis of two loads
- On the basis of one load and spring constant
- On the basis of one load and free length
Read our detailed explanation.